Registrera dig och få 30 % rabatt på din första beställning!
General · 10 min read

Color theory for artists: what you need to paint and print

Color theory for artists: what you need to paint and print

Color theory for artists comes down to three properties. Hue is the color family (red, blue, yellow-green). Value is how light or dark the color is. Saturation, also called chroma, is how intense it is compared with gray. Of the three, value does most of the work: if the lights and darks are right, the picture reads even when the hues are odd. And the fastest way to harmony is a limited palette, because colors mixed from the same few tubes are related by default.

This guide explains each part, shows how to mix without making mud, and covers what happens to your colors between screen and paper.

The color wheel

The color wheel is the spectrum bent into a circle, so that you can see how hues relate. The traditional painter's wheel has 12 steps:

  • Primary colors. Red, yellow and blue. In this model they cannot be mixed from other colors.
  • Secondary colors. Orange, green and purple, each mixed from two primaries.
  • Tertiary colors. The six in-between hues, such as red-orange, yellow-green and blue-purple.

The red-yellow-blue wheel is a painter's convention. Printing uses cyan, magenta and yellow (plus black), and screens build every color from red, green and blue light. The practical lessons below hold in all three systems.

Color theory for beginners: the three properties

If you are new to color theory, learn to describe any color with three answers: which hue, how light, how intense. "Light, dull orange" (a sand color) and "dark, dull orange" (brown) are the same hue at different values.

Value: why a painting that works in grayscale works in color

Value creates form, depth and the focal point. The eye goes first to the place where the lightest light meets the darkest dark.

This is why a painting that works in grayscale also works in color. If the value structure is sound, you can swap the hues freely and the image still reads. If the values are wrong, no choice of hue will fix it.

Check your values early. Squint until the detail disappears, or take a phone photo and turn it to black and white. You should see three or four clear value groups.

Remember that pure hues have different values. Yellow straight from the tube is light, and blue or purple is dark.

Saturation: let neutrals do the quiet work

A picture where every color is at full intensity has no focal point. Accents stand out when they are surrounded by neutrals: grays, browns and dulled versions of your main hues.

Keep your strongest color to a small share of the surface. A small saturated red in a field of gray-greens looks more intense than the same red surrounded by orange and pink.

Warm and cool colors

Warm and cool colors divide the wheel in two: reds, oranges and yellows are called warm, and blues, greens and purples cool. Warm colors tend to appear to come forward, and cool colors to sit back, which is one way to suggest depth in a landscape.

Temperature is relative. Every hue has warmer and cooler versions: a red that leans toward orange is warmer than a red that leans toward purple. And the same gray looks cool beside an orange and warm beside a blue. So judge a color against its neighbors.

Color harmonies and when to use them

A harmony is a rule for choosing hues by their position on the wheel. Complementary colors, the pairs that sit opposite each other, are the best known. On the painter's wheel the pairs are red and green, blue and orange, and yellow and purple.

Harmony Hues used Good for Example
Complementary Two opposite hues Maximum contrast, one clear focal point An orange fox in a blue-gray winter field
Analogous Three or four neighbors Calm, unified mood A forest in yellow-green, green and blue-green
Triadic Three hues evenly spaced Lively, playful pictures Red, yellow and blue in a simplified still life
Split-complementary One hue plus the two beside its opposite Contrast with less tension than a pure complement A blue interior with yellow-orange and red-orange accents
Monochrome One hue in many values and intensities Mood, and practicing value A night scene entirely in blues

In every scheme, let one hue dominate and keep the others smaller or duller. Two complements at equal size and full strength compete with each other.

Sell your art with Printumo

Get started with selling your art as canvas and fine art prints

Get started for free

How to mix colors without making mud

Mud is a mixture that has become duller than you intended. It has a simple cause, so it can be avoided.

Why complements make neutrals and mud

Mixing two complements means mixing all three primaries: red plus green is red plus yellow and blue. Each paint absorbs part of the light, and together they absorb most of it, so the result moves toward gray or brown.

Used on purpose, this is a valuable tool. A touch of the complement dulls a color while keeping it lively, and the grays you get relate to the rest of the painting. Mud happens when it is accidental: too many pigments in one mixture, a dirty brush, or overworking wet layers into each other.

Three habits prevent most of it:

  • Limit each mixture. Two or three tube colors plus white is usually enough.
  • Choose primaries that lean toward each other for clean secondaries. A yellow that leans green plus a blue that leans green gives a bright green. A yellow that leans orange plus a blue that leans purple gives a dull one, because both carry a little red.
  • Clean the brush and stop stirring. Mix on the palette, place the stroke, and leave it.

Mixing a dark without black

Black from the tube can look flat next to mixed colors, and a mixed dark has a temperature you can steer. A classic recipe is ultramarine blue plus burnt umber: more blue gives a cool dark, more umber a warm one. Add white and you get a range of grays.

A limited palette recipe

A reliable starting set is a warm and a cool version of each primary, plus white. The pigment names below are common examples, and most brands have equivalents.

Tube Leans toward Common example
Cool yellow Green Lemon yellow
Warm yellow Orange Cadmium yellow deep
Warm red Orange Cadmium red
Cool red Purple Alizarin crimson or quinacridone rose
Warm blue Purple Ultramarine blue
Cool blue Green Phthalo blue
White   Titanium white

Seven tubes give you clean secondaries and plenty of neutrals. For a stricter start, use one red, one yellow, one blue and white.

Simultaneous contrast

A color never appears alone, and its neighbors change how you see it. This is simultaneous contrast: a mid-gray looks darker on white and lighter on black, and the same gray looks slightly greenish next to a strong red. If a color looks wrong, the cause may be the color beside it, so test mixtures next to their neighbors before judging them.

Color on screen versus in print

A screen emits light and builds color from red, green and blue (RGB). A print is ink on paper that reflects the light in the room. A lit screen is therefore brighter than any sheet of paper, and it can show some colors that inks cannot.

In practice:

  • The most saturated screen colors do not fully reproduce. Neon greens, electric blues and similar glowing colors come out less intense in print.
  • Judge your work at moderate screen brightness. A screen at full brightness makes an image look lighter than it will print.
  • Export in sRGB. It is the standard color space for the web and a safe choice for print services that ask for RGB files.

Preparing your files for print

If you sell prints through Printumo, the color handling is simple. Export your file in sRGB. Files in other RGB profiles are converted to sRGB. Printumo does not adjust brightness, contrast or sharpness, and there are no printer profiles to download. Nothing is corrected for you, so make your color decisions before you export.

The full checklist for resolution, formats and file size is in preparing your art files for Printumo. For the printing method itself, see giclée printing. If you are reproducing a painting, start with how to photograph artwork for print, because color accuracy begins with the photo.

Three short exercises

  1. A nine-step value scale. Paint or draw nine squares from white to black with even steps between them. Then mix one color from your palette to match each of three steps: light, middle and dark.
  2. A complement chart. Pick one pair, such as blue and orange. Paint seven squares that move from pure blue to pure orange in even steps. The middle squares are your neutrals. Add white to each for a second row.
  3. One subject, two palettes. Paint the same simple object twice at a small size, for example 15x15 cm (6x6 in), using only three tubes plus white. Use an analogous set first and a complementary pair plus one neutral second. Keep the values the same and compare the mood.

Frequently asked questions

What is the most important part of color theory for beginners?

Value. Learn to see how light or dark a color is before you worry about its hue, and check your work in grayscale. Then practice with a limited palette.

What are complementary colors?

Complementary colors are pairs that sit opposite each other on the color wheel. On the traditional painter's wheel they are red and green, blue and orange, and yellow and purple. Side by side they intensify each other, and mixed together they dull each other toward gray or brown.

How do I mix colors without making mud?

Keep each mixture to two or three tube colors plus white, clean your brush between mixtures and avoid overworking wet paint. Mud appears when all three primaries end up in a mixture by accident. Used on purpose, the same effect gives you neutrals that fit the painting.

Why do my colors look different in print than on screen?

A screen emits light and a print reflects it, so a screen is brighter and can show some very saturated colors that inks cannot match. View your work at moderate screen brightness, export in sRGB, and expect neon greens and electric blues to print less intense.

Relaterade artiklar